By now, we've all seen chalkboard paint everywhere. It's all over pinterest and blogland, in our kitchens and offices and even bedrooms and bathrooms. From spray paint to DIY concoctions, in shades of gray, red, pink and blue and everything in between.

But I have never, ever seen one in white. Not that a nice charcoal grey would have bothered me, but I figured if I was making my own and could choose any shade in the world, why not white? If you've been around this blog long enough, you've probably noticed white is my go-to color. It's clean and timeless—you just can't go wrong.

So this was the plan when it came to filling this empty wall:

Old picture... ignore the mid-backsplash installation

I set out to find the perfect size chunky frame for my chalkboard, and Jesus called my name:

Yardsale find, $3.

After removing the contents and prying off each of the 300 staples (someone wanted Jesus to stay there forever) I had myself a blank slate, ready for some paint:

I lightly sanded the frame and dry brushed on a coat of white, leaving some of the wood to show through for a more distressed look:

then a coat of pale turquoise (same shade as the tea time sign and flower bucket), and in a matter of minutes it was good to go.

I apologize for the horribly lit picture. It looks white here, but I assure you it is a very soft turquoise.

Next it was time for the chalkboard.

I picked up a thin piece of plywood at Lowe's and we used a jigsaw to cut it to size (18x24" in this case).

I did a light sanding over the surface to ensure it was smooth and ready, then I applied a coat of primer:

Next, it was time for the chalkboard paint.
I used materials I had on hand: Behr's flat paint (in white) and unsanded grout that we had leftover from our bathroom tile.

After thoroughly mixing, I was ready to apply the mixture to my board.

I wanted to get this right, so I carefully sanded in between coats until it was completely smooth. I ended up using 3 solid coats when it was all said and done.

After the paint is fully dry, you are supposed to "prime" the surface by dragging the flat side of chalk along the surface until it is completely covered, then wiping down with a damp sponge.

This step did not go as planned for me.

I did not have any white chalk on hand, so I grabbed the closest shade: yellow. Instead of simply wiping clean, it stained the surface so I was left with an off-white chalkboard. I ended up having to scrub it down with lysol, and re-prime with white chalk. I'm not sure if darker colored chalkboards run into this problem... but perhaps this is why no one has made a white chalkboard?

Anyway, the chalkboard still "works", but there are still markings and smears of color when I wipe with an eraser. I have to use cleaner to actually remove the pigment from the surface. I imagine this isn't as noticable on a darker surface. Still, it was worth a try. I love the way the white looks in the space!

Here's the formula in picture form:

I cut this formula down to 1/3 for my small surface area

Project Breakdown:
Frame - $3
Plywood - $5
Paint - already had
Grout - already had
Chalk - $1
Total: $9

Can't beat it for under $10! I encourage you all to try your own, and report back to me on how well the formula works for you. I'm interested to know if it's as good as the store bought stuff.

Be back in a few with our bathroom crown molding + a preview of some other projects we've gotten ourselves into around here...